Epsilon EClipse™ Electrochemical Workstation

Features

• Potentiostat, galvanostat, and potentiometer
• Bi-potentiostat option
• Multiple document Windows interface
• USB connection
• Optically isolated circuitry for noise reduction
• Analog filtering
• Moving average digital smoothing
• Positive feedback iR compensation with circuit stability testing
• Internal dummy cells for hardware test
• Remote control of BASi® cell stands (CGME, C-3 Cell Stand, RDE-2)
• Multiple experimental runs
• File subtraction
• Multiple text data file formats, including DigiSim
• Peak finding routines (auto and manual)
• File overlay
• Anson plot (Q vs. t^1/2) for chronocoulometry
• Cottrell plot (i vs. t^-1/2) for chronamperometry
• Initiate potentiostat at open circuit potential
• 50/60 Hz selection for noise minimization
• IUPAC or polarographic axis convention
• Wide current range - microelectrode to small-scale electrosynthesis

Specifications

Potentiostat	Channel 1 applied potential: Dynamic DAC: 16 bit, ±3.275 V @ 0.1 mV resolution or ±10 V @ 0.33 mV resolution Offset DAC: 8 bit, ±2.55 V @ 10 mV resolution Channel 2 applied potential: Dynamic DAC: 8 bit, ±2.55 V @ 10 mV resolution Compliance voltage: ±12 V Maximum current: 100 mA Bandwidth: > 100 kHz Bias current: < 1pA Electrometer input impedance: > 1012W (values for parameters other than applied potential are for both channels)
Current-to-voltage converter	Full scale sensitivity: 1 nA*, 10 nA*, 100 nA, 1 µA, 10 µA, 100 µA, 1 mA, 10 mA,100 mA, (*secondary gain used) Secondary gain: x1, x10, and x100 ADC resolution: 16 bit Sampling rate: 50 kHz (20 µs/conversion) Data length: up to 64k points - fast
Galvanostat	Applied current: 50 pA - 50 mA Range: ±10 V, ± 1 V Measured potential resolution: 0.02 mV Max leakage current: 30 pA
I/O	Eout (applied potential) Iout (current to voltage output) Ein (input connection for external applied wave form) Cell Stand port (control of C-3 Cell Stand and CGME) Accessories Port (control of RDE-2) PC (USB) port Trigger out (TTL)
Minimum PC requirements:	Win 7 or higher Pentium III 512 MB RAM 50 MB hard drive space available USB port
Power requirements:	120 or 240 VAC, 50/60 Hz, 60 VA
Dimensions & weight	15.75" (40 cm) x 5.25" (13 cm) x 12.75" (32.5 cm) 17.5 lb (7.4 kg) (1 channel)