Two Electrode Configurations

AC9C: Two Electrode Configuration; 8 – Working Electrodes Sharing Single Reference Electrode (Circular Array): Pack – 5 or 10 Units

This screen printed amperometric sensor has eight working electrodes and one reference electrode in CIRCULAR ARRAY. It is formed on a corundum base. It is 5.9 cm long, 1.3 cm wide, 0.63 mm thick, and weighs 1.7 grams. The diameter of the each working electrode is 1.00 mm ±0.05 mm. There is a silver electrical contact at the end of each sensor and this conductive path is covered by a dielectric protection layer. They can be ordered in multiples of 5 sensors. The BVT-AC9C Connector is an appropriate adapter for these sensors.

Part Number	Description
SP-9101	AC9C (1mm Gold Array; Silver/Silver Chloride Reference)
SP-9101-WSP	AC9C.WSP (1mm Polished Gold Array;Silver/Silver Chloride Reference)
SP-9111	AC9C (1mm Gold Array; Silver Reference)
SP-9201	AC9C (1mm Platinum Array; Silver/Silver Chloride Reference)
SP-9211	AC9C (1mm Platinum  Array; Silver Reference)
SP-9301	AC9C (1mm Silver Array; Silver/Silver Chloride Reference)
SP-9311	AC9C (1mm Silver Array; Silver Refernece)
SP-9401	AC9C (1mm Graphite Array; Silver/Silver Chloride Reference)
SP-9411	AC9C (1mm Graphite Array; Silver Reference)

AC5: Two Electrode Configuration; 8 Working Electrodes each with 8 Reference Electrodes (Horizontal Array): Pack – 5 Units

This screen-printed electrode HORIZONTAL ARRAY configuration has eight working electrodes each with eight reference electrodes made by sputtering with an integrated connector. It is formed on a corundum ceramic base. The diameter of the working electrode is 1.00 mm ±0.05 mm. At the end of the sensor there is an integrated connector. It relates to the active part by the silver conducting paths which are covered by a dielectric protection layer. Working electrode material available in platinum, silver and graphite.

Part Number	Description
SP-5101	AC5 (1mm Gold Horizontal Array (8); Silver/Silver Chloride Reference (8))