Calibration Station and In Vitro Testing

The Calibration Station facilitates preparation and in vitro calibration/microdialysis of up to two rodent brain probes. Look to the Calibration Station for easy probe wetting and setup of your in vitro experiments.

  • Use for initial microdialysis probe wetting and in vitro recovery determinations.
  • The Calibration Station can also be used to store probes between uses


  • Probe clamps can also be used on the stereotaxic frame for stereotaxic implantation (the MD-1521 probe clamp rod is also needed).
  • Standard plastic vials fit into holes on top of the Calibration Station.
  • Vial contents are visible from the front.
  • Stainless steel pins position the probe clamps so that probes are centered and cannot touch the sides of the vial.
  • The “Transit” position hole on the station holds either a wetted rat brain probe (BR) or mouse brain probe (MBR) just prior to insertion into the animal.
  • If you are switching probes, the clamps fit on a CMA/130.


Calibration Station

 MD-1522  Calibration Station with 2 MD-1520 Rat Brain (BR) Style Probe Clamps
 MD-1524  Calibration Station with 2 MD-1523 Mouse Brain (MBR) Style Probe Clamps


 MD-1520    Probe Clamp for BR type Probes / Guide Cannula, 1 each                       
 MD-1523  Probe Clamp for MBR type Probes / Guide Cannula, 1 each
 Custom  Custom Clamp Rod Available to suit other stereotaxic frames Ask BASi


  • Content coming soon


  • Content coming soon